+ App
Temperature ProbesMoisturePosition SensorsWhat's NewContact UsAbout UsTS2 Thermostat
External Sensors
CT Clamps, Temperature Probes, Flowmeters, Particulate

Our line of external current sensors work in conjunction with the N series DB18 module or Model SC18 transmitter to wirelessly monitor AC current loads up to 250A (600V max).

Temperature probes are used with our N series DB31 module or SC31 (Thermistors), N series DB32 module or SC32 (Thermocouples) and N series DB33 module or SC33 (RTDs).

For temperature/ humidity VDC/mA output transmitter probes, the N series DB18 module or SC18 provide precision temperature measurements in a wide variety of environments. Specialty flanged duct thermistor, surface temperature RTD, Freezer RTD w/Glycol bottles and Incubator/ HVAC temperature and humidity probes are available. Our wireless transmitters are compatible with any off the shelf Thermistor, RTD, or Thermocouple. Additional temperature system configuration options is available on Temperature Monitoring Systems.

Broad range of external pressure sensors and ranges available to work with the N series DB18 module or SC18 to wirelessly communicate pressure measurements throughout a facility. Options include battery operated and low power pressure transducers that do not require an additional power supply. Measurement ranges include 0-100 psi, 0-200 psi and 0-500 psi. Our wireless transmitters are compatible with any pressure sensor on the market with a mV, VDC or mA output.

Connecting cables and accessories for integrating existing instrumentation and measurement devices with voltage or current outputs with the N series DB18 module or Model SC18 wireless transmitter. Cables for voltages up to 10VDC and typical current output signal of 4-20mA. Our custom cables allows expansion of the Paragon data logging system to monitor any parameter within a facility or process.

True power WattNode sensors can measure true power using both voltage and current readings. Revenue grade (+-0.5%) models are also available for high precision applications. Wattnode true power sensors are connected directly to the N series DB14 module or SC14 wireless transmitter.

CO2 probe transmitters for indoor air quality and energy efficiency applications. The duct mount CO2 transmitters with junction box and attached probe offer accuracy and fast/ simple connection to our N series DB18 module or SC18 wireless transmitter in our wireless logging and monitoring systems. CO2 measurement range of 0-2000 PPM at an accuracy of +-3% of reading. Our wireless transmitters are compatible with any Carbon Dioxide probe on the market with a mV, VDC or mA output.

The Model DC1100-PC Air Quality Monitor is a cost effective instrument for measuring particulate of indoor air. The room monitoring DC1100-PC is wall mounted and connects directly to our N series DB80 module or SC80 wireless RS-232 transmitter in our wireless logging and monitoring systems. A true particle counter with 2 size ranges - small (bacteria, mold, etc) large (pollen, etc.). This particulate monitor has a local display of the indoor air quality with an LCD screen providing small and large particle counts with a dynamic bar graph showing actual count reading.

Decagon moisture sensors can be used to measure moisture levels in media ranging from soils to Masonite.The moisture sensors are connected to the N series DB18 module or SC18 wireless transmitter in our wireless logging and monitoring systems. Our wireless transmitters are compatible with any moisture sensor on the market with a mV, VDC or mA output.

The WSS1 water/ leak detector can be placed in areas to monitor for water from leaks and/or floods. With the Model WSS1 connected to the N series DB18 module or Model SC18 wireless transmitter, receive immediate notification via software, email and/or text message of a leak detection alarm. The model SC18 can connect up to four (4) WSS1 leak detectors or combination of our compatible external sensors.

Remote readable 3/4" Stainless Steel Pulse Output Water Meters are a great solution for remotely, or locally, monitoring water consumption. Industrial grade, stainless steel (201 grade) water meter with pulse output that wires directly to our N series DB14 module or SC14 wireless pulse counter transmitter to integrate into any monitoring, logging, or control system. This meter produces a pulse for every 1/10 cubic foot (approx 0.75 gallon, or 2.83 liters) that flows by the meter. The pulses are counted and wirelessly transmitted by the Model SC14.

Position sensors such as our magnetic door position switches can be used to log or monitor equipment status. Position sensors are connected to the N series DB14 module or SC14 wireless transmitter in our wireless logging and monitoring systems.