Wireless Data Sensors & LoggersHome > Products > Sensors
Ambient Temperature & Humidity
The SC12 Temperature & Humidity Sensor is our indoor wireless temperature & humidity sensor. The SC12 has sensor accuracy of of +-3% humidity.
The SC22 Temperature & Humidity Sensor is our outdoor version of the SC12. The SC22 has the same temperature and humidity accuracy as the SC12, but has additional sealing to enable outdoor use in a covered environment.
The SC11 Temperature Sensor is our most popular wireless temperature sensor. It has the longest wireless range of all the temperature sensors, and has fully upgradeable firmware.
The SC1 Temperature Sensor is our base level wireless temperature sensor. Even though it has a slightly shorter range than the SC11 and its firmware cannot be upgraded, the SC1 has the same sensor accuracy as the SC11.
The SC31 Thermistor Sensor accepts 2 external thermistor transducers (any type from 3k to 100k) and is accurate to +- 0.1°C.
The SC32 Thermocouple Sensor accepts one external thermocouple of any type and is accurate to +- 0.3°C.
The SC33 RTD Sensor accepts one 3-wire Pt100 (100 Ohm) RTD transducer and is accurate to +- 0.1°C.
Ambient Pressure & Temperature
The SC71 Ambient Pressure Sensor measures ambient air pressure. The SC71 has an accuracy of +-0.01mb and can be used to monitor even small pressure changes in ductwork and atmospheric storms.
Light and Proximity
The SC13 Light Sensor is our base level wireless light sensor. The SC13 has an accuracy of +-10% lux and is perfect for indoor lighting studies and solar energy measurements for solar generation.
The SC23 Light Sensor is our outdoor version of the SC13. The SC23 has the same accuracy as the SC13, but has additional sealing to enable outdoor use.
The SC14 External Terminal Sensor accepts inputs from external sensors via a 5 position terminal block. The SC14 is compaitble with Wattnode True Power monitoring instruments, wet/dry flowmeters, door open/close position sensors and many more. Inputs such as 0-3.3V and pulsecount can be easily set up using the DataRecorder software widget.
The SC18 External Jack Sensor is our most popular external sensor device, and accepts up to 4 external sensors from many third-party providers such as Onset Computer Corporation (HOBO), including current measurement (CT), air pressure and flow, gauge pressure, moisture, CO2, temperature, humidity, 4-20mA, VDC outputs and many more.
The SC8 External Jack Sensor is our base level external sensor device. It includes the same functionality of the SC18 except with a reduced wireless range and non-upgradeable firmware.
The SC50 Motion Sensor is our most popular wireless motion sensor, and can be used to monitor occupancy and motion. The SC50 is for indoor use only.
The SC60 Motion Sensor is our outdoor version of the SC50 wireless motion sensor, and is typically used for outdoor motion monitoring.
The SC76 Differential Pressure Sensor measures the pressure difference between two spaces, commonly used to confirm positive pressures in clean rooms or other building areas.
The SC76 Differential Pressure Sensor can monitor a number of critical room pressure environment applications including research and storage areas as well as hospital laboratories, operating, isolation and clean rooms.
Carbon Dioxide - Air Quality
The SC75 CO2 Sensor measures carbon dioxide levels, which is used to establish indoor air quality (IAQ). It operates both with and without an AC wall adapter, allowing for flexible placement.
Serial Communications - RS-232, RS-422/485
The SC80 Serial RS-232 transmitter enables system gateways to wirelessly communicate with RS-232 serial device outputs. The SC80 supports Dylos Laser Particle Counter serial ouputs for integration with logging systems. It operates both with and without an AC wall adapter, allowing for flexible placement.
The SC81 Serial RS-422/ 485 transmitter allows system gateways to wirelessly communicate with serial networked devices and transmit data into the logging system. The SC81 operates both with and without an AC wall adapter, allowing for flexible placement.
The SC34 Small-voltage Sensor has a resolution of 0.03mV, making it ideal for monitoring small signals such as strain gage bridges, low power pressure transducers, specialty thermistors, and other precision sensors.
The SC70 Accelerometer Sensor measures acceleration and vibration up to 8g, and is useful for monitoring rotating equipment vibration or tracking motion of products.
The SC72 Magnetometer Sensor measures magnetic field strength, and can be used to track runtime of motors, log compass orientation, or used in combination with a magnet to monitor door positions.